Caracal Bust 3D STL Printable - 3D Model STL 3D print model

Caracal is a highpoly digital sculpture, no UVs, no textures, no materials nor textured.

Caracal model is not rigged nor animated.

Printing Settings:

The size of the model is fixed as in preview photo, it can be scaled to the desired size. All parts are combined not seperated, & can be used for 3d printing.

Layer Height:

For fine detail: 0.1 - 0.15mmFor faster printing: 0.2mmInfill Density: 10-15% is usually sufficient for a bust, as it's primarily a decorative piece. Increase infill if you want a heavier, more solid feel.

Print Speed:

Outer walls: 20-30 mm/s (for detail)Inner walls: 40-60 mm/sInfill: 60-80 mm/s

Temperature:

PLA: 200-220°CPETG: 230-250°CABS: 240-260°C (with an enclosure)