BubbleGum Priss HARD Suit by SPARX 3D print model

Priscilla Sonoda Asagiri . . or Priss as we know her looking tantalising getting out of her HardSuit Armour, inspired by BGC series 1987-1991 and the BGC Tokyo 2040 series, but with a more detailed believable than rounded armoured suit.Second in a series of models inspired by Bubble Gum CrisisThe front and back armour parts are removable and the 3 heads interchangeable with magnets(see pics) The torso’s are also interchangeable using the same system of magnets.

This model is offered for sale to individuals and no sales of STL files or models manufactured from the STL. For own personal use, not to be shared.

The model is1/6 scale at H290 x W140 x L145 With base2 upper torso’s options1 lower torso and 2 boot parts3 heads (and 1 head pin if not using magnets)1 front armour in 3 parts1 Rear armour 1 base1 floor helmet (no head) that is also wearable/interchangeable1 head stand for spare heads1 torso stand if using interchangeable torso/magnetsAlso included is a piston rod in the shape you need to attach to body, or use 2mm wire as in pics

17 items in total.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

TIPS:Resin Printing;

Hollow 2.40 Raft 98%Boots, Lower Torso’s, Heads, Upper Torso’s, Armour Arms

Hollow 2.40 Raft 92%Base

Do not Hollow Raft 98%Armour chest piece, Back armour main, head pin, piston rods

FDM nozzle0.16 30% fill,speed 50

ALWAYS dry assemble and “trim” parts prior gluing.assemble front armour, rear armour parts before paint.Assemble lower torso and boots to base to help align the model.