BubbleGum Linna HARD Suit by SPARX 3D print model

Linna Yamazaki . . looking tantalising pulling herself out of her HardSuit Armour, inspired by BGC series 1987-1991 and the BGC Tokyo 2040 series, but with a more detailed believable than rounded armoured suit.Fourth in a series of models inspired by Bubble Gum Crisis I have split the file into two parts;I have made this decision for this and any future models, not to offer NSFW files with the basic model and have the NSFW parts available in a separate download. This allows more people to view my models without having to view pictures of the alternative parts.I hope you all understand my reasons for doing this in future releases.This file contains a non adult model,

The Custom Licence is NOT royalty Free, the STL or Models created by your purchase may NOT be sold. The licence is for personal use only.

The front and back armour parts are removable and the 8 heads interchangeable with magnets(see pics) Two different posed upper torso’s are also interchangeable using the same system of magnets. The parts are interchangeable with the other 11 torso’s available in the “ADD-Ons (contact me for details)The model is1/6 scale pose1 is H290 x W150 x L90 Without base, pose2 is H280 x W190 x L1002 upper torso’s options1 x left leg for pose21 lower torso and 2 boot parts8 heads (and 1 head pin if not using magnets)2 x helmet flyers or use wire1 front armour in 3 parts1 Rear armour in 3 parts1 base2 head stand for spare heads1 torso stand if using interchangeable torso/magnetsAlso included is a piston rod in the shape you need to attach to body, or use 2mm wire as in pics

29 items in total.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.3D PRINTING SETTINGSTIPS:Resin Printing;Hollow 2.40 Raft 98%Boots, Lower Torso’s, Heads, Upper Torso’s, Armour Arms, left leg pose2

Hollow 2.40 Raft 92%Base

Do not Hollow Raft 98%Armour chest piece, Back armour main, back armour wings, head pin, piston rods,helmet flyers

FDM Rest at 0.16 30% fil, l speed 50

ALWAYS dry assemble and “trim” parts prior gluing.assemble front armour, rear armour parts before paint.Assemble lower torso and boots to base to help align the model.