3D MODEL DESCRIPTIONWhen you download you will have 12 Stl Files (Total 1 ,5 GB )
Disassembled Parts
1.Base2.Blood Rayne Left Arm3.Blood Rayne Right Arm4.Blood Rayne Upper Body wiht Head5.Blood Rayne Lower Body6.Blood Rayne Right Scythe7.Blood Rayne Left Scythe8.Succubus Lower Body9.Succubus Upper Body
Full Version
1.Blood Rayne , Succubus with Base Full2.Blood Rayne Figure3.Succubus Figure
This product is Nuskul Art Collectible Edition.Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.
Technical SuggestionScythes will be added by gluing.No holes were drilled to ensure that the figures can be placed in the desired position on the base and that the pattern on the ground is not distorted.
While designing the model, narrow angles were avoided as much as possible. When throwing support, calculate 45% slope.While cleaning the supports, heating a needle over a flame and touching it to the ends of the supports can ensure smooth cleaning.
Follow me for more modelsYou can send me a message about the model or in general.You can also reach me via social media.
3D PRINTING SETTINGSPrint Temperature : : 200Table Temperature : 60Layer Height : 0.2 mmIntıal Layer Heigt : 0.2 mmWall Line Count : 0.4 mmFill Density : % 20
Support Settings
Support Stracture : TreeMaximum Branch Angle : 60Branch Diameter : 3Trunk Diameter : 16Branch Diameter Angle : 5Support Placement : EverywherePrefferred Branch Angle : 25Diameter İncrase to Model : 1Minimum Height to Model : 3Intial Layer Diameter : 6Branch Destinty : 20Tip Diameter : 0.8Limit Branch Reach : YesOptimal Branch Range : 30Rest Preference : On Model if RequiredSupport Overhang Angle : 55Support Pattern : GyroidConnect Support Lines : YesSupport Density : 5Support Line Distance : 8Intial Layer Support Line Distance :8Support interface Thicknes : 1.2