Articulated Veloci-Raptor 3D print model

3D MODEL DESCRIPTION

Our Velociraptor has articulated little hands so it can wave you hello when you print it.

This STL file is recommended for FDM Printers!3D Printing Time Based on Ender 3: 16 Hours 16 Minutes (will vary accord to you printer model)Approximately Height: 11 cm

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mmFirst Layer Line Width: 0.48 mm / 120%Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)Recommended Initial Layer Height: 0.16 mmRecommended Layer Height: 0.16 mmRecommended Perimeters/ Walls: 3.Recommended Infill (%): 10% (Gyroid)Needs Support: No.Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!