April ONeil - Teenage Mutant Ninja Turtles - Collectible 3D print model

When you download you will have 25 Stl Files ( 1,7 GB )

Full Parts

1.April O^Neil Figure 2.April Base 3.Full Body With Base

Disassembled Parts

1.April Base Disassembled 2.April Hip and Torso Disassembled 3.April Head Disassembled 4.April Left Hand and Microphone Disassembled 5.April Left Arm Disassembled 6.April Left Leg Upper Disassembled 7.April Left Leg Lower Disassembled 8.April Right Leg Upper Disassembled 9.April Right Leg Lower Disassembled 10.April Right Arm Disassembled 11.April Right Hand With Pizza Disassembled

Sliced Parts

1.April Base 2.April Hip and Torso 3.April Head Disassembled 4.April Left Hand and Microphone 5.April Left Arm 6.April Left Leg Upper 7.April Left Leg Lower 8.April Right Leg Upper 9.April Right Leg Lower 10.April Right Arm 11.April Right Hand With Pizza

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Print Settings

Print Temperature : : 205 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2