Apollo Special Nr I Eugene Cernan 3D print model

Detailed figure of Apollo 17 astronaut Eugene Cernan drilling a hole in the lunar surface.
Delivered files in scale 1/12

C U S T O M - S C A L I N G
Without guarantee - here is a helpful list of scaling factors for the most common scales:
It may be useful to check the size of your planned scene before printing in order to adjust the figure if necessary.

• 1:12 = 100%: (Original Scale of this Model)
• 1:1 = 1200%
• 1:6 = 200%
• 1:7 = 171.43%
• 1:8 = 150%
• 1:9 = 133.33%
• 1:10 = 120%
• 1:12 = 100%
• 1:15 = 80%
• 1:16 = 75%
• 1:18 = 66.67%
• 1:24 = 50%
• 1:25 = 48%
• 1:30 = 40%
• 1:32 = 37.5%
• 1:35 = 34.29%
• 1:43 = 27.91%
• 1:45 = 26.67%
• 1:48 = 25%
• 1:50 = 24%
• 1:64 = 18.75%
• 1:72 = 16.67%
• 1:87 = 13.79%
• 1:144 = 8.33%
• 1:160 = 7.5%
• 1:220 = 5.45%
• 1:350 = 3.43%

Recommended printer type:
SLA resin printer from very small to approximately 1:10 scale.
Of course, the figure and all required parts can be scaled up to a higher scale as required for FDM printing with filament.

Please note!
Any printing results are up to the skill and equipment of the buyer.
No correspondence can be made on issues of customization of the scale and its printability.
The price of this high quality models is not negotiable.