Ada Wong Collectible Edition Resident Evil 3D print model

When you download you will have 11 Stl Files (Total 700 Mb )

Disassembled Parts

1.Base 2.Head 3.Hip 4.Left Arm With Smoke Bomb 5.Left Leg 6.Right Arm 7.Right Hand With Gun 8.Right Leg 9.Torso

Full Version 1.Base 2.Ada Wong Full Figure

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Technical Suggestion

While designing the model, narrow angles were avoided as much as possible. When throwing support, calculate 45% slope. While cleaning the supports, heating a needle over a flame and touching it to the ends of the supports can ensure smooth cleaning.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

3D PRINTING SETTINGS Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2