Dr Horrible Death Ray 3D print model

It's not a freeze ray this time it's a Death Ray. This is a prop I made years ago for a friend for a costume, little known fact the death ray was actually a prop from Firefly. It was repainted and turned upside down and turned into the iconic Deathray. Will you build one? The internal is fitted with several rods inside that are cut and sized accordingly. the internal rods are set up as a set of 3 but other parts such as the standoffs can be substituted.

Things you'll need an 8MM or close to it rod of any material. The distances need to be cut to no longer than these sizes.The primary shaft needs to be just of 73.5CM long. The Secondary Support shaft to prevent twisting is 28CM long.Third and final shaft is 4CM long.

A 12.7MM maxim size rod for the inside of the scope The shaft distance for the inside of the scope is 28.5CM long