1-5 SCALE FULLY 3D-PRINTABLE 2022 FORMULA RACECAR 3D print model

3D MODEL DESCRIPTION

This is our 3D printable model of the 2022 Formula race car. With a scale of 1:5 this is a huge display model.(Roughly 42 x 115 cm)

NOTE: THE MODEL IN THE PICTURES IS AN OLDER VERSION, THE NEW CAR HAS BEEN LOWERED 20mm SO IT WILL LOOK BETTER!

The model also features slots in the floor plank in order to hang the car on the wall as a display.

The model contains an assembly guide, please follow this guide with care.

Also fit check any parts before permanently attaching them!

Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: staff.stllabs@gmail.com

Feel free to share your models with us on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)

3D PRINTING SETTINGS

The file is split into multiple parts or one big file so it should be printable on any printer.

There are a few parts that are recommended to print on a resin printer for more detail.

We recommend to use a brim or some gluestick to make it adhear so there wont be any warping.

The infill rate doesn't really matter, we recommend 5-10%Shells and perimeters may also very on your own likings.

We recommend using supports!

Happy printing!