VOIDBANE - DAUNTLESS SWORD FOR COSPLAY 3D print model

All files are in STL format.

Model printed in parts.

CUT TYPE 1 - The blade is splited into 8 parts (plus 4 Spikes), the handle into 3 parts and the handguard into 4 parts (plus pommel) with pins to fit them together.

CUT TYPE 2 - Blade splited into 16 parts (plus Spikes splited into 8 parts), the handle into 6 parts and the handguard into 8 parts (plus pommel splited into 2 parts) with pins to fit them together.

UNCUT - STL full uncut. Recommended for mini figures.

Size: 2443mm (244cm)

The STL files are able to be printed as a cosplay item, display item, mini figure item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Voidbane sword was made for fans of the game Dauntless and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference! If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.2Perimeter Shell 3Fill 10/15%Supports are neededSpeed 60-70%