ULTRASEVEN HELMET - CLASSIC DESIGN 1967 - COSPLAY 3D print model

Ultraseven helmet for Cosplay/Display - Ultraseven classic design used in the 1967/1968 original TV series.

All files are in STL format.

Model printed in parts:

MASK: I followed reference images from the 1967/1968 oririginal TV series to make the modeling more precise.

HEAD (NAPE PART): I separated 3 STL files.

TYPE 1 - This model is cut and made to be fitted into the mask to be used as Cosplay.

TYPE 2 - This model was inspired by the last episodes. When the nape of the seven was only with one bar. (Recommended for demonstration)

TYPE 3 - This model was inspired by the first episodes. When the nape of the seven still had two bars. (Recommended for demonstration)

EYES: I modeled two versions of the outer lenses and two versions of the inner lenses.Outer - Type 1 - Lenses with a larger curvature to fit with the inner lenses.Type 2 - I modeled more solid external lenses to be used alone without having to fit inner lenses.

Inner - Type 1 - Lenses without holes for the eyes. It’s a totally solid piece (Recommended for exposure).Type 2 - Lenses with holes for the eyes, making them closer to the lenses of the TV series (recommended for Cosplay).

BEAM LAMP: I separated 2 types of printing for the Beam Lamp gem.

TYPE 1 - A solid piece without details.

TYPE 2 - Two pieces: An inner gem and a cover that can be printed in transparent resin to be placed over the gem.

EYE SLUGGER: 2 types are available. Each fits with its respective helmet. (ATTENTION: Be careful before printing).

TYPE 1 - The helmet has two holes on top so that the EYE SLUGGER can be fitted with its own pins.

TYPE 2 - The helmet has spaces on top so that magnets can be glued, as well as the EYE SLUGGER.

The STL files are able to be printed as a cosplay item.

-For stable 3D printing, I recommend using the Bambu Studio software.