EARTH SLICER - POWER RANGERS SAMURAI - COSPLAY AND MINIATURE 3D print model

• All files are in STL format.

• Model printed in parts.

CUT TYPE 1 - STL file with the baldes, the Earth Slicer base splited into 3 part (with one pin) and the Power Disc.

CUT TYPE 2 - Blades splited into 4 parts (with 3 pins to fit them together), the Earth Slicer base splited into 3 part (with one pin). The Power Disc is splited into 2 parts.

CUT TYPE 3 - Blades splited into 8 parts (with 3 pins to fit them together), the Earth Slicer base splited into 3 part (with one pin). The Power Disc is splited into 2 parts.

UNCUT - STL full uncut.

The STL files are able to be printed as a cosplay item, display item, miniature item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Earth Slicer was made for fans of the Power Rangers Samurai/Samurai Sentai Shinkenger and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference! If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.1Perimeter Shell 3Fill 10/15%Supports are neededSpeed 60-70%