BARRACUDA BLADE - POWER RANGERS SAMURAI - COSPLAY AND MINIATURE 3D print model

• All files are in STL format.

• Model printed in parts.

CUT TYPE 1 - STL file with the balde (Model of the scabbard apart plus a pin on the base), the handle and the Power Disc splited into 2 parts.

CUT TYPE 2 - Blade splited into 3 parts (Model of the scabbard splited into 3 parts too plus pins), handle splited into 2 parts with pins to fit them. The Power Disc is splited into 2 parts.

CUT TYPE 3 - Blade splited into 6 parts (Model of the scabbard splited into 6 parts too plus pins), handle splited into 4 parts with pins to fit them. The Power Disc is splited into 2 parts.

UNCUT - STL blade full uncut.

BLADE UNCUT + DISC - Blade full with separeted Power Disc.

SCABBARD UNCUT - STL sacabbard full uncut.

Size:

Blade: 716mm (71,6cm)Scabbard: 804mm (80,4cm)

ATTENTION: The blade does not fit in the scabbard on any of the models, they are separate versions!

The STL files are able to be printed as a cosplay item, display item, miniature item.

This model is a dummy replica item.

• For stable 3D printing, I recommend using the Bambu Studio software.

This 3D model of the Barracuda Blade was made for fans of the Power Rangers Samurai/Samurai Sentai Shinkenger and also for everyone who likes swords in general.

ATTENTION: All parts were cut thinking of the size of the printing bed of the 3D printers and not for each color that the part has. So the part of coloring the pieces before/ after being printed is up to the customer’s preference! If you want to hire me for any customization, please contact me through direct messages and not by the ad itself! But if there are any questions about the STL files, these can be made in the comments section, as it may be useful to other people.

For FDM of DLP/SLA tecnology

FDM Config.:

Layer height 0.1

Perimeter Shell 3

Fill 10/15%

Supports are needed

Speed 60-70%