Inverted Tesla Coil - Ionic Lifter - Concept

Two inverted Tesla coils (or 6, one for every axial direction).the top ring should be placed besides or close above the top conductive hemisphere, guiding down self created ionic wind along its surface, then turned back in to the center in order to complete the circuit. i would probably create spikes in the round metal top donut, to give the electricity a location to jump metals. like we need the electricity to jump between sharp and round, only we decide where, and we would like the jump to happen all around the disc shape many times, and fast as well.

the bottom half is turned 180 degrees upside down, performing the exact same function, but turned upside down.

• maybe i should make another model....

imagine what 6 directions would do inside the 2 squashed hemispheres. maybe we can change the direction the wind follows, independent of the two plates their orientation in space. sometime we want two cups working together, for creating lift.

sometime we want two cups working opposing from each other, for maintaining altitude. one cup pushing ionic wind down, and the other cup pushing wind up, neutralizing direction. sometimes you would like to decrease altitude very quickly, so both cups could function pushing ionic wind down, each for their own orientations in space.should model in some battery space and 4 or 8 power units holder shapes, perhaps so the two cups can test their power, see if they can lift and carry the stored power and system electronics as well.

also create little metal spikes all around the metal donut shapes to decide how many initial jumps need to be made, [hard to smooth][pointy to round] as we decide where they should occur. and the jump must also occur in a controlled balanced manner for realizing a stable allround flight.

Another Dutch Noah’s Ark Replica.

maybe it's my adhd.

(would also function as a omni directional tone generator?)

i live off of comments, your likes and your tips. thank you for watching and reading.