1 400 SCALE MODEL STAND 3D print model

For JC Wings, NG Model, GeminiJet, Aviation 400, Phoenix, and more...

You might need to trim the stand to fit your model plane slot perfectly!

3D PRINTING SETTINGSTo ensure a good-looking print with sufficient strength to support a diecast model plane, here are the recommended 3D printing settings:

Printer SettingsLayer Height: 0.2 mm (for a balance of quality and speed)Wall Thickness: 1.2 mm (3 perimeters)Top/Bottom Thickness: 0.8 mmInfill Density: 20-30% (for good strength)Infill Pattern: Grid or Triangles (for better support and strength)Material SettingsMaterial: PLA or PETG (PLA is easier to print and provides a good surface finish, while PETG offers better strength and durability)Print Temperature:PLA: 200-210°CPETG: 230-250°CBed Temperature:PLA: 50-60°CPETG: 70-80°CSpeed SettingsPrint Speed: 50 mm/sInitial Layer Speed: 20 mm/s (for better adhesion)Cooling SettingsFan Speed:PLA: 100% after the first few layersPETG: 30-50% to avoid warpingAdhesion SettingsBuild Plate Adhesion Type: Brim (to improve bed adhesion and prevent warping)Brim Width: 5 mmSupport SettingsSupport Structure: Touching build plate onlySupport Overhang Angle: 50 degreesSupport Density: 15-20%