Flexi Cupid Love Dragon EASY TO PRINT with no supports 3D print model

This dragon comes in two versions: **one with smaller hooks suitable for larger prints and very durable materials, and the second version, more versatile and easier to print due to larger hooks and sleeker wings.Intended as a decorative item, this dragon is a joy to print—guaranteeing excellent results even for novice printers, as it's designed to require no supports. Each layer self-supports progressively, eliminating the need for additional adhesion methods like brims.While supports are not necessary, I recommend using glue for added security. Simply apply a bit of glue, print, and once finished, remove it from the bed hassle-free, without unlocking pieces or detaching supports.Have fun! Feel free to adapt it if you want to share a special make! You will get a royalty free licence: feel free to print also for commercial use!**My favourite print config:

• Creality Print Slicer
• Creality K1 Max FDM printer (GCODE INCLUDED!)
• Red Hyper PLA Creality Filament

Quality

• Layer Height 0.10mm
• Line Width 0.45mm

Shell

• Hide Z Seam Yes
• Wall Thickness 0.87mm
• Top/Bottom Thickness 0.80mm

Infill

• Infill Pattern Grid
• Infill Density 15.00%

Speed

• Print Speed 300.0mm/s
• Initial Layer Speed 60.0mm/s
• Travel Speed 500.0mm/s

Temperature

• Nozzle 220.00°C
• Bed 45.00°C

Travel

• Enable Retraction Yes
• Retraction Distance 0.50mm
• Retraction Speed 40.00mm

Support

• Generate

Support NO