Viking Shield Low-poly 3D model

A lit about Viking Shield. The shield was the most common means of defence. The sagas specifically mention linden wood for shield construction, although finds from graves show mostly other timbers, such as fir, alder and poplar with steel or iron shield boss. These timbers are not very dense and are light in the hand. They are also not inclined to split, unlike oak. Also, the fibres of the timber bind around blades preventing the blade from cutting any deeper unless a lot more pressure is applied. In conjunction with stronger wood, Vikings often reinforced their shields with leather or, occasionally, iron around the rim. Round shields seem to have varied in size from around 45–120 centimetres (18–47 in) in diameter but 75–90 centimetres (30–35 in) is by far the most common.The smaller shield sizes came from the pagan period for the Saxons and the larger sizes from the 10th and 11th centuries. Most shields are shown in illuminations as being painted a single colour although some have a design painted onto them; the most common designs are simple crosses or derivations of sun wheels or segments. The few round shields that survived have much more complicated designs painted on them and sometimes very ornate silver and gold work applied around the boss and the strap anchors.

• High Poly mesh included in blend file
• 4k textures (zip include directx, opengl and UE4 maps)
• PBR
• Low poly geometry
• Not for 3d print

If u have a questions or problems with model write to me in private messages. I will answer all your questions and help you.