ChaiRs low-poly asset pack Low-poly 3D model

Here I'm present a full pack of ChaiRs!

This bundle contain 21 model. We have ChaiRs, TabouRets, and a bit of ThroNes.

All sitting place are 0.4m in Heigth.

Here is presented models in this pack:

@ Wood TabouRets

• Round - 0.65 L x 0.65 W x 0.4 H(74 tris and 48 verts)
• Round soft - 0.65 L x 0.65 W x 0.4 H(132 tris and 74 verts)
• Round solo leg - 0.65 L x 0.65 W x 0.43 H(276 tris and 156 verts)
• Square - 0.6 L x 0.6 W x 0.4 H(118 tris and 89 verts)
• Rectangle - 0.95 L x 0.58 W x 0.4 H(150 tris and 88 verts)

@ Stone TabouRets

• Round - 0.75 L x 0.75 W x 0.4 H(76 tris and 40 verts)
• Round cracked - 0.72 L x 0.69 W x 0.4 H(76 tris and 40 verts)
• Cylinder - 0.44 L x 0.44 W x 0.4 H(252 tris and 128 verts)
• Square - 0.39 L x 0.39 W x 0.4 H(92 tris and 48 verts)
• Square with wood plate - 0.6 L x 0.6 W x 0.4 H(98 tris and 56 verts)
• Square with wood plate V2 - 0.6 L x 0.6 W x 0.4 H(82 tris and 48 verts)
• Rectangle C shape - 0.88 L x 0.6 W x 0.4 H(50 tris and 27 verts)
• Rectangle solo leg - 0.95 L x 0.58 W x 0.4 H(64 tris and 34 verts)

@ Wood ChaiRs

• Single back plank - 0.63 L x 0.58 W x 1.08 H(208 tris and 122 verts)
• 2 back planks - 0.62 L x 0.58 W x 1.08 H(236 tris and 138 verts)
• Lower placed back plank - 0.62 L x 0.54 W x 1.01 H(192 tris and 114 verts)
• Back plank leg - 0.8 L x 0.63 W x 1.39 H(384 tris and 214 verts)
• Back plank leg V2 - 0.75 L x 0.62 W x 1.36 H(360 tris and 224 verts)
• Back arrow shape plank leg - 0.68 L x 0.61 W x 1.37 H(346 tris and 194 verts)

@ Stone ThroNes

• ThroNe - 0.75 L x 0.72 W x 1.67 H(64 tris and 40 verts)
• ThroNe V2 - 0.92 L x 0.73 W x 1.75 H(150 tris and 88 verts)

I check models in UE5.

• Fbx import without issues. Only need to change filter on texture to nearest

• OBJ import with issues. Need to change material setup to opaque from translusent, possibly need to manually import texture.