E
2025-08-05 15:47:06 UTCenjoy-doc-23
I wish they had this on inches so I can just get the exact dowel to work. I wanted to do this project but can't find 27mm rods.
Useto navigate. Pressescto quit
SIDE TABLE - BEDSIDE TABLE - 3D PRINT 3D print model
Description
Side table designed to build with 3D printed joints and 27mm wooden rods. On top of the structure you can place a round or square wooden board or any other shape you need, as long as it does not exceed the dimensions.
It has a Nordic Scandinavian style. It consists of three legs joined by a joint and 3 more joints that join each leg to the board. It is approximately 53 cm high, depending on the height of the board you prefer to use.
Attached is an image showing the dimensions and placement of the rods. Its dimensions should be of: 3x61 cm. In addition, 6 small screws are needed to fix the legs and the board to the joints.
Print with the highest layer height and line width possible to achieve maximum strength.
Take a look at the rest of the pieces of the collection in our profile.
SIDE TABLE - BEDSIDE TABLE - 3D PRINT
Editorial No Ai License
SIDE TABLE - BEDSIDE TABLE - 3D PRINT
Editorial No Ai License
3D Print Modeling
3D Model formats
Format limitations
- OBJ (.obj, .mtl) (2 files)22.5 MB
- Stereolithography (.stl) (2 files)10 MB
- SolidWorks (.sldprt, .sldasm, .slddrw)689 KB
- IGES (.ige, .igs, .iges)1.68 MB
3D Model details
- Ready for 3D Printing
- Publish date2021-03-16
- Model ID#2928399
Similar Models
to SIDE TABLE - BEDSIDE TABLE - 3D PRINT
Users who bought this item also bought...
