Battery box with tweezers 10xAA 10xAAA 3x9V 3D print model

Battery box for storing batteries in a safe environment. The box closes and can be turned upside down without opening. You can safely store batteries in this box and take them where ever you need them.The box is capable of storing 10 AA, 10 AAA and 3 9V batteries.

There are also tweezers that are helpful for taking the batteries out of the box. In the box there is also a tweezers compartment, so you can have tweezers always together with the battery box.

Battery box dimensions: 91,5 x 106,5 x 58mm

Battery box and battery box top slicer settings:

• print in a position as shown in photos

• layer height: 0.2 or 0.25

• layer width: 0.4 or 0.5

• wall line count: 2 or more

• top/bottom: 2 layers or more

• infill pattern: lightning for short print time, or any other pattern

Tweezers slicer settings:

• print in a position as shown in photos

• increase size in slicer by 10x (from 100% to 1000%)

• layer height: 0.2 or 0.25

• layer width: 0.4 or 0.5

• wall line count: 3

Happy printing