2001 A Space Odyssey Moon TMA Equipment 3D print model

Inspired by the movie 2001 : A Space Odyssey, comes this STL file kit for all of the equipment seen in the scene of the Moon TMA site at clavius. The files were created off photos from two books on the making of the movie, namely - 2001: The Lost Science and The 2001 File - Lange archives These were drawn upscaled for detail capturing and then to be printed at 50% to be in 1/6th scale. See the photos as compared to the Max Guenther Dave Bowman figure who stands approx 12" tall. at 50% all large pieces print easily on an ANycubic Mono X printer or similar sized Resin Printer. Of course you can print at any scale youwish for your diorama. NOTE: some corrections were made after printing the test pieces seen in the photos namely: 1- Added stand lugs for the three rods at the top of the stand, 2 - Thicker test equipment mount, 3 - Hollowed out the lighting fixtures for inclusion of SMD LEDs if desired, 4 - Wall panel was hollowed out for reduced resin useage and stiffer warp resistent design. Print all pieces standing in the tallest orientation to minimize warpage and best fit. You may choose to use brass hobby rod for the stands over PVC rod supplied at hobby stores everywhere.

Models Include:
1 - Wall panel (interlocking to build length to match movie set)1 - Wall beam (Straight run to interlock with Panels)1 - Wall Top Anchor (as in Movie scene)1 - Stand1 - Stand wheels set2 -Ground power cable boxes (one spherical top, One rectangular)1 - Set of Stand handles1 - IR Imaging Head1 - Radioactivity Head1 - Magnetometer Head1 - Particle Scattering HeadAstronaut shown is for reference only and available on CGTrader by others.