Baby Bog 406 Fuel Carrier - 1-18 TRX4M RC body attachment 3D print model

Quench your crawlers’ thirst with the new Baby Bog 406 Fuel Carrier body attachment! The 1/18 Fuel Carrier was designed specifically for the 1/18 Baby Bog 406 front cab (sold separately).

The Baby Bog 406 Fuel Carrier works best when paired with the TRX4M wheelbase of 155mm with width of 130mm from outermost tyre to tyre, with tyres being 62mm diameter.

Due to the fuel carrier’s naturally high CG, mounts are only designed for the TRX4M Standard version, as the High Trail version will make it too tippy and unstable to drive properly.

As the front cab is bolted in with screws, the fuel carrier is snapped on with 8 strong magnets. This provides easy battery changing operations as well as decreases the risk of breaking parts as the fuel carrier can detach when rollovers happen.

Designed features and details Magnet mount fuel carrierFunctional light bucketsScale realistic ladderDetailed top manhole coversSide mounted fuel tankSide valves

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

Should you need any help, please do not hesitate to contact us!

FDM printing:PLA+ filament0.12mm-0.2mm layer heights30-50% infill densitySupports are necessary