Hoth Macro Binoculars Prop from Empire Strikes Back 3D print model

These are the 3D print files (STL) for a Hoth Macro Binoculars Prop from Empire Strikes Back.

Contained in the zip file are all the files you will need to print this on your own printer. These files are for personal use only, they are not to be onsold or distributed.

The scale is as close to the original as we could get it, including some of the hacks to make things fit done to the original, hence why corners are shaved off the eyepieces, this is intentional.

The three buttons can also be printed in translucent plastic if you want to place LEDs behind them.

I recommend printing this in a silver base plastic as this will make weathering much easier, since you can paint in white then scratch the paint off to match the movie prop.

The front cover is also able to be flipped over in either direction (I noticed I placed it the wrong way in these photos) however it varied slightly in the movie depending on who's version you looked at. Either way, it can go on either way.

When I print these I tend to use PETG and will print at 0.2mm layer height for the body and 0.15 for the detail.