K
konrad-haseneder
Very Nice model. Its a Marathon to print, needed over a week for this but very well designed.
Useto navigate. Pressescto quit
Fire truck with ladder toy fully 3D printable 3D print model
Description
This is a fire truck toy, based on the same truck model as the concrete mixerand the tank truck models.
Fully printable, no support (except ladder), one material/colour printer. All parts should fit on a 20x20cm print bed.
Assembly video-tutorial: https://youtu.be/EwvFrpBn-Vw
The tolerance for pieces that need to fit tightly is 0.1mm,for pieces that need to allow movement (like screws and axles) 0.3mm or more.
Printing list: Nb. STL file name rezolution support colour (my make)
- 1x axle_back.stl 0.16mm no red
- 1x axle_front.stl 0.16mm no red
- 0x back_light.stl 0.16mm no
- 2x back_light_with_flat_cut.stl 0.16mm no orange
- 1x back_light_with_flat_cut.stl 0.16mm no white
- 1x back_light_with_flat_cut.stl 0.16mm no red
- 1x back_plate_09_fire_truck.stl 0.12mm no black-whit
- 2x base_dist.stl 0.16mm no orange
- 1x base_ftruck_left.stl 0.16mm no orange
- 1x base_ftruck_right.stl 0.16mm no orange
- 1x cabin_back_body.stl 0.16mm no red
- 1x cabin_fire_truck.stl 0.16mm no red
- 0x cabin_ft_your_own_support.stl 0.16mm yes
- 1x cage.stl 0.16mm no red-orange-gray
- 1x cage_art_die.stl 0.16mm no orange
- 1x cage_axle_l38.stl 0.16mm no orange
- 2x cap_double_rim.stl 0.16mm no blue
- 6x cap_double_rim.stl 0.16mm no orange
- 2x cap_single_rim.stl 0.16mm no white
- 4x cone_road_sign.stl 0.16mm no white-orange
- 1x fire_truck_ladder_axle_l48.stl 0.16mm no orange I
- 1x floor_short.stl 0.16mm no white
- 1x front_grill_09_fire_truck.stl 0.12mm no black-red-black
- 1x front_lights.stl 0.12mm no blue
- 1x interieur.stl 0.16mm no gray
- 1x interieur_base.stl 0.16mm no orange
- 1x ladder_art_p1.stl 0.16mm no orange
- 1x ladder_art_p2.stl 0.16mm no orange
- 1x ladder_art_p3.stl 0.16mm no orange
- 1x ladder_base.stl 0.16mm no red
- 1x ladder_base_articulation.stl 0.16mm no orange
- 4x leg_ext_part.stl.stl 0.16mm no orange
- 4x leg_int_part.stl.stl 0.16mm no orange
- 1x ladder_in_out.stl 0.16mm no gray
- 1x mirrors 0.12mm no black(TPU)
- 2x rim_double.stl 0.16mm no white
- 2x rim_single.stl 0.16mm no white
- 3x roof_light.stl 0.16mm no blue
- 1x screw_gear_knob.stl 0.16mm no black
- 2x screw_l6mm.stl 0.16mm no blue
- 13x screw_l9mm.stl 0.16mm no black
- 4x screw_l9mm.stl 0.16mm no white
- 6x screw_l13mm.stl 0.16mm no orange
- 1x side_door_left.stl 0.12mm no gray
- 1x side_door_right.stl 0.12mm no gray
- 0x sleeping_screw_l9mm.stl 0.16mm no
- 0x sleeping_screw_l13mm.stl 0.16mm no
- 1x steering_wheel.stl 0.16mm no black
- 4x tire_outter_cut.stl 0.16mm no black(TPU)
- 2x tire_simple.stl 0.16mm no black(TPU)
- 1x wheel_house_back_ft_left.stl 0.16mm no red
- 1x wheel_house_back_ft_right.stl 0.16mm no red
- 1x wheel_house_front_left.stl 0.16mm no white
- 1x wheel_house_front_right.stl 0.16mm no white
Observations:
- all objects already have the intended print direction in the STL files!
- front_lights - if these don't fit, scale them down in your slicer 2-3-4% until these fit
- for the cabin_with_support.stl enable thin walls
- if you don't like the built in supports for the cabin,then you can find only the cabin in cabin_your_own_support.stl
- most of the parts were printed with PLA. only the tires andthe mirrors were printed from TPU (flexible material)
- screws... there are also sleeping screws STLs includedthese are printed on the side which makes them a lot strongerthe drawback is that these don't close the holes completely...So use as many sleeping screws as you can if the toy is going to be played with, and only normal/round ones otherwise
- multi-colour-parts are printed with the same one material/colour printer,the multi-colour effect is obtained by changing the material during the print
E
estrella31008
Really Cool Model. Printed it in 3 Days. My Son loves it. Only the ladder basket is very difficult to print
T
taryago
Thank you that was fun to assemble and print, my kid is happy, I have also personalized the toy car plates and the picture on the cage. Printed tires in PLa cuz I didn’t have TPU but they’re okay. nevertheless there were challenges and it could have bee beneficial to have more details from the author about printer setting he used. the hardest print was the back cabin - the narrow side pieces holding the doors kept failing form until I didn’t enable the “avoid crossing walls in Bambu slicer” , but out of the 3 prints of the back cabin all 3 had issues, because of those failures I tried reprinting doors for cabin a lot of times but finally understood the model doors for the back cabin are fine as is, it were the issues on my prints of those side pieces on the print #2 , in the back cabin print #3 the doors fitted exactly as the author intended with no adjustments. I used Bambu slicer (Prusa slicer) organic tree supports included into a brim for the from cabin doors and the windshield cantilevered bridges, on my first print the author’s supports failed without the brim, but maybe with a brim they would have been just fine, that recommendation could have been very appreciated in the instructions. Also a comment form author that the print has many difficulties and it’s not an entry level because as a beginner having made this one as one of my first I didn’t come to realize this before some prints started failing for me. All in all the most difficult for me were the cabin parts (front and back) later I already had the experience to dial in the parameters for other parts and those printed beautifully from the first try. Overall the project took me about a week time in Bambu P1P , I took a lot of time to dial in settings learn from the failed prints etc. in the sheer print time the model on my p1p took about 45 hours of direct print time (failed prints included) it can be printed now faster NCR I am very familiar with the designs, 24+ hours I think on p1p. I also didn’t notice the author has a bigger model of the same toy, I would have probably gone first for the bigger. Also there are some difficulties with the base orange feet falling from the sides and the upper ladder part with a cage going forward when folder when it is not intended, but I gotta give the credit for ingenuity - very thoughtful mechanic design, the ladder does no fold backwards when upright in the air - magnificent! Maybe the design could have been improved with a possibility of including magnets oh yes, will try that out, and an additional plastic part to hold the ladder from going forward all by itself, the kid figures out it can be done with a road cone lol =)))))also the side pieces of the back cabin need to be made a little thicker, maybe the doors set deeper for that, maybe the side part just made bigger and wider. As for everything else and the impressions overall it can be felt how much love and ingenuity and time!!!! is put into the toy by the author, love the authors attention to detail and design - some improvement still possible here and there but I would definitely consider buying more designs and printing other toys. Thank you! Merci beaucoup ! B)
R
rogerbbaker1
Should have a place where you can download all the files at once?
G
glumanda463
Auch das Feuerwehrauto hat seine Arbeit aufgenommen , mein Enkel spielt jedesmal damit wenn er bei mir ist.
Fire truck with ladder toy fully 3D printable
Editorial No Ai License
Fire truck with ladder toy fully 3D printable
Editorial No Ai License
3D Model formats
Format limitations
- Stereolithography (.stl) (52 files)12.8 MB
- OBJ (.obj, .mtl) (2 files)1.2 MB
3D Model details
- Publish date2020-04-23
- Model ID#2383626
- Ready for 3D Printing
Similar Models
to Fire truck with ladder toy fully 3D printable
