Boeing 777-200 - Miniature Free 3D print model

Boeing 777-200 Scale 1:1000

My favorite slicing software is Cura, I will explain the printing process to just assembling:

1. import from file number 1 to 6 at a time, specifically number 1 make the infill to 100% and the other is 10%.
2. print number 7 which is multiplied to 5 times.
3. print number 8 which is multiplied to 3 times.
4. clean the print, try first before gluing it.
5. Cut the parts as in the black and white image.
6. to adjust the size of the rear wheel using sandpaper.
7. then the assembly sequence is in the black-and-white picture attachment.Hopefully the above explanation helps you, feel free if you have questions and suggestions, thank you.

3D PRINTING SETTINGSSpeed: 15-30mm/sTravel: 120mm/sMaterial: PLA (210°C hotend, 55°C heatbed)Brim: 3mm (Outside)Draftshield: 4mm (Full) - all landing gears