Microsoft 3D Builder Test Model by Raidenmeden Free 3D print model

Microsoft 3D Builder Test Model by Raidenmeden inspired in microsoft windows logos.

Printer settings:Print time: ~37 minutes Layer height : 0.1 mmInfill : 40%Print Speed : 60 mm/s (Perimeters, infill,top solid infill...)First layer speed: 30%(Tested with repetier host using Slic3r.)

This model includes:Bridges, 2 different kind of bridge with or without arc from 1mm to 4mm between supports.Angle test, 5 inclined columns of 25º,30º,35º,40º and 45º.Embossed surface details, made with the windows logo from 0 to 2.40mm deep.Embossed bottom details,detail made with the windows logo of 0.1mm.Moving and removable parts to test printer clearances between separating pieces. (Gap distance = 0.2mm):-The first microsoft logo on the left can freely rotate.-The different kinds of prisms can be removed and fit into the correspondent holes.Two irregular cuts, 1 sharp and 1 rounded to test minimum details from more than 3 mm to 0 mm.Walls modeled at 1mm thick to test gapping between walls.Different kind of forms added or removed for different types of test.

Also, this model can be used as keychain.