PARABOLIC ANTENNA TRACKER TRACKING SYSTEM 3D model

The model contains the most popular formats:

1. 3DS MAX: *.max
2. Blender: *.blend
3. Rhinoceros: *.3dm
4. SketchUp: *.skp
5. Wavefront OBJ: *.obj *.mtl (Multi Format)
6. FBX: *.fbx (Multi Format)
7. STEP: *.step *.stp (NURBS)
8. IGES: *.iges *.igs (NURBS)
9. ACIS: *.sat (NURBS)
10. 3DS MAX all ver.: *.3ds (Multi Format)
11. Stereolithography: *.stl
12. AutoCAD: *.dwg

• Each file was checked for opening and full content by the model.
• The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.
• Renders Are made in Luxion Keyshot
• “WE PROVIDE 3D MODEL CHEAP PRICE BUT WITH GOOD QUALITY”
• If you need any other formats we are more than happy to make them for you. Contact me for any question :)

Sincerely Your, SURF3DMORE INFORMATION ABOUT 3D MODELS :An antenna tracking system tracks a primary antenna to follow a moving signal source, such as a communication satellite. A secondary antenna has a greater beam width than the primary antenna and receives the same tracking signal from the satellite. The primary antenna is tracked according to a predetermined search pattern which causes a variation in the signal amplitude depending upon the relative location of the satellite and the antenna position. The signal strength signals from the two antennas are input to a summation function which takes the difference of the two signals. The noise and signal variation component of the two signals is substantially the same and is therefore eliminated from the resulting difference signal. An antenna control unit utilizes the resulting difference signal to select the optimum signal strength for the particular step of the search pattern. This system is particularly applicable to extremely high frequency communication channels (86 GHz and above) which are subject to atmospheric distortion and noise. Antenna Tracking Systems can apply to Broadband and Microwave Radio Systems as well for Point-to-Point and Point-to-Multipoint communications