KENPACHI AND YACHIRU FANART FROM BLEACH for 3d printing 3D model

Kenpachi and Yachiru FanArt from Bleach .STL FILE

PLA printing recommendations

Recommended print settings

Layer height 0.1mm

Print speed 40 mm/s

Fill Density 10%

Supports: Tree supports (CURA slicer)

Adhesion Platform/Platform Adhesion: Skirt

Resin printing recommendations.

Layer height 0.05

Number of lower layers 16

Exposure time of bottom layers 45 seconds

Exposure time (monochrome display) 2 seconds