Very beautiful model. Cannot fit inside the build plate so have to scale it down to 75%. Nevertheless very magnificient.

First of all this rating isn't for the art/design itself because it look awesome. This rating is for the 3d file/Mesh that have a lot of problems. 1. The bases weren't manifold and aren't flat on the bottom part so I had to edit them in mesh mixer to make them flat and to close the mesh holes (luckily meshmixer detects and fixes the tiny holes automatically, which they were a ton) otherwise the whole main base and water base will require support on the whole surface wasting time and material. 2. There are some parts on Nezuko pants mesh (pants, boots) that are too thin so the slicer isn't able to slice them creating holes, had to "inflate"them in meshmixer to fix them. 3. Nezuko hands aren't separate from the arms like Tanjiro's, making her arms almost impossible to print with any decent quality because you will need to position them in a way that will require tons of supports for the fingers to print correctly. And the support will make the area that they touch rough, adding a lot of post processing (putty, sanding etc)to make them look smooth again. Same thing with Nezuko's left leg/feet the connection doesn't sit flush even after sanding and shaping leaving a noticeable gap so I had to modify the mesh to fix that gap. 4. Nezuko's Box doesn't sit flat on Tanjiro's back. Looking the print from the back, there is a substantial gap on the bottom left side, and that's after sanding and shaping Tanjiro's torso piece to make it sit closer together, otherwise the gap will be bigger and all around. For the asking price of $50 (even at the discount price of $35) I shouldn't have to be fixing any mesh or fitting errors, it should be ready to slice and print with minimal post process.