Kingsman Gazelle my Favourite Assassin by SPARX 3D print model

One of my favourite assassins! didn't realise while researching photo's/images just how toned a body Sofia has, well I was sold on the commission.So here is the Fan Art/Sculpt of Sofia Boutella/Gazelle from the Kingsman movie.

I have tried to keep costumes and sizes true to the movie with a few adjustments to allow the model to be split and printed . . . . .This Download is ONLY THE MAIN FULL COSTUME AND BODY PARTS ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL AND TWO ALTERNATE BASES.

As previous an NSFW adult add-ons version is available to purchase separately.Conyact me via email or FB details on bio for details.

The torso’s and head parts are removable and interchangeable with magnets (see pics)

Based on Sofia’s Measurements of 165cm Tall 36B–24–35 the Model is 1/6th scale therefore without base 383mm long(due to blades), 130mm wide and 139 tall.With Girder Base 383mm long(due to blades), 184mm wide and 218 tall.

Sofia Boutella/Gazelle 1 upper torso Pose1 Left Arm1 Right Arm1 lower torso1 left blade1 right Leg n Blade1 spike for blades (print 2)5 Head and heads pin1 head stand

Bases1 Flying Base one piece3 Flying Base separated for small SLA1 Flying Base Logo1 girder base Left1 girder base Right1 girder part Left1 girder part Right

23 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.3D PRINTING SETTINGS

Resin Printing;Hollow 2.40 Raft 95%Legs, Blades, lower torso

Hollow 2.70 Raft 110%Head’s, Upper Torso

DO NOT HollowArms

FDM Arms 80% fill 0.12 speed 40Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..especially the right arm as it is almost impossible to paint hand against body after gluing!