Hercules C-130H Static Low Poly Blank

Hercules C-130H Static Low Poly Blank Low-poly 3D model

Verification details of the FBX file
Files
Binary FBX
Scene
No unsupported objects
Geometry
No N-gonsNo faceted geometryManifold geometry
Textures and Materials
PBR texturesNo embed texturesSquare texturesPower of 2 texture sizesAssigned materials
UVs
No UV overlapsUV unwrapped model
Naming
Allowed characters
Description

The Lockheed C-130 Hercules is an American four-engine turboprop military transport aircraft designed and built by Lockheed (now Lockheed Martin). Capable of using unprepared runways for takeoffs and landings, the C-130 was originally designed as a troop, medevac, and cargo transport aircraft. The versatile airframe has found uses in other roles, including as a gunship (AC-130), for airborne assault, search and rescue, scientific research support, weather reconnaissance, aerial refueling, maritime patrol, and aerial firefighting. It is now the main tactical airlifter for many military forces worldwide. More than 40 variants of the Hercules, including civilian versions marketed as the Lockheed L-100, operate in more than 60 nations.

The Korean War showed that World War II-era piston-engine transports—Fairchild C-119 Flying Boxcars, Douglas C-47 Skytrains and Curtiss C-46 Commandos—were no longer adequate. On 2 February 1951, the United States Air Force issued a General Operating Requirement (GOR) for a new transport to Boeing, Douglas, Fairchild, Lockheed, Martin, Chase Aircraft, North American, Northrop, and Airlifts Inc.

The new transport would have a capacity of 92 passengers, 72 combat troops or 64 paratroopers in a cargo compartment that was approximately 41 ft (12 m) long, 9 ft (2.7 m) high, and 10 ft (3.0 m) wide. Unlike transports derived from passenger airliners, it was to be designed specifically as a combat transport with loading from a hinged loading ramp at the rear of the fuselage. A notable advance for large aircraft was the introduction of a turboprop powerplant, the Allison T56 which was developed for the C-130. It gave the aircraft greater range than a turbojet engine as it used less fuel.[4][5] Turboprop engines also produced much more power for their weight than piston engines. However, the turboprop configuration chosen for the T56, with the propeller connected to the compressor, had the potential to cause structural failure of the aircraft if an engine failed. Safety devices had to be incorporated to reduce the excessive drag from a windmilling propeller.

The C-130 entered service with the U.S. in 1956, followed by Australia and many other nations. During its years of service, the Hercules has participated in numerous military, civilian and humanitarian aid operations. In 2007, the C-130 became the fifth aircraft[N 1] to mark 50 years of continuous service with its original primary customer, which for the C-130 is the United States Air Force. The C-130 Hercules is the longest continuously produced military aircraft at more than 60 years, with the updated Lockheed Martin C-130J Super Hercules currently being produced.

this is a static, non rigged, Lowpoly mesh, blank layered 2048 psd template layered texture, for MSFS or XPlane Scenery Airport development , standard materials, not a detailed interior just enough to be seen as part of enviroment on airfields or airports

thanks for looking! dont forget to check my other models

A
aphachi922024-01-31 06:01:18 UTC
it's good~nice working!!!!
djancoek
djancoek2023-01-08 21:40:42 UTC
nice
Item rating
1 0
J
jamesat882023-11-17 03:15:20 UTC
Recommended
Very well done. Definitely will buy from here again. Thank you
Hercules C-130H Static Low Poly Blank
$15.75
 
Royalty Free No Ai License 
Hercules C-130H Static Low Poly Blank
$15.75
 
Royalty Free No Ai License 
Response 79% in 2.9h
3D Modeling
Low-poly Modeling
UV mapping
Texturing
Hire meView all Designer's Models

3D Model formats

Format limitations
Native
  • Autodesk 3ds Max 2016 (.max)1.43 MB
Exchange
  • OBJ (.obj, .mtl) (2 files)444 KB
  • DXF (.dxf)1.83 MB
  • 3D Studio (.3ds)200 KB
  • Blender (.blend)1.32 MB
  • Autodesk FBX (.fbx)225 KB
  • Other 26.1 MB

3D Model details

  • Publish date2023-01-08
  • Model ID#4215648
  • Animated
  • Rigged
  • VR / AR / Low-poly
  • PBR
  • Geometry -
  • Polygons 3,417
  • Vertices 3,631
  • Textures
  • Materials
  • UV Mapping
  • Unwrapped UVs Mixed
  • Plugins used
  • Ready for 3D Printing
Help
Chat