Dassault Mirage 2000 Fighter Jet Low-poly 3D model

The Dassault Mirage 2000 is a French multirole, single-engine fourth-generation jet fighter manufactured by Dassault Aviation. It was designed in the late 1970s as a lightweight fighter based on the Mirage III for the French Air Force (Armée de l'Air). The Mirage 2000 evolved into a multirole aircraft with several variants developed, with sales to a number of nations. The variants include the Mirage 2000N and 2000D strike variants, the improved Mirage 2000-5 and several export variants. Over 600 aircraft were built and it has been in service with nine nations.

The Mirage 2000 features a low-set thin delta wing with cambered section, 58 degrees leading-edge sweep and moderately blended root; area-ruled; two small canard wings, fixed, placed just behind the air intakes. It incorporates negative stability and fly-by-wire controls with four analog computers. An airbrake is fitted above and below each wing in an arrangement very similar to that of the Mirage III. A noticeably taller tailfin allows the pilot to retain control at higher angles of attack, assisted by the small strakes mounted along each air intake.

Product Features (Poser): * Poser figure: obj, cr2/ png, with 2,121 polygons. * Tail rudder can rotate left-right, with an ERC dial on the Body. * Left and right wing flaps and ailerons can rotate up and down. - One ERC dial rotates all wing flaps and ailerons up or down. - A second ERC dial rotates the wing flaps and ailerons in opposite directions, as if the aircraft was turning. * The canopy can not open and there is no cockpit. * Landing gear/ doors can be hidden or shown; hide/ show poses are included.

Textures: * One set of texture maps at 1024x1024 pixels.

This product is designed for use in Poser 5 and above. It has not been tested for use in DAZ Studio; although DAZ Studio may import the files, we do not use DAZ Studio and can't support any issues that may occur.

Product Features (3ds/ obj): - Approx 2,121 polygons. - Low-polygon and game-ready model. - Made entirely with 3 and 4 point polygons. - Includes group information, which your software should interpret as separate parts, which includes: -- Rudder. -- Left and right wing flaps. -- Left and right wing ailerons. -- Landing gear/ doors. - Although the model includes these parts, this version of the model is not rigged. - The canopy can not open and there is no cockpit. - The model is UV mapped and one texture (in jpg format) is included, at 1024x1024 pixels.

This model is fully licensed for use in games and apps. Also works great as background scene-filler.