Valentines Special - Hello kitty Sanrio collection

Print Setting info:STL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.*Print-in-Place, No supports needed.*Multicolor 3MF*0.2 Layer height (Use 0.12 or 0.16 layer height for better quality)*10%-15% Infill (I recommend Gyroid, Honeycomb or Grid)*3 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)*Make sure you have good adhesion.*I tested this model on scale of 50% to 200%, I do not suggest smaller than 60% for the model.Happy Printing :)