Setrab Oilcooler Pro Serie with connectors 3D Model Collection

For my dioramas I designed some Oilcooler.As Reference i used the Setrab Pro Series (Series 1, 6 and 9).

The design is in Scale 1:6. To use the design for other scales here are the values to set in the slicer:1:6 = 100%1:8 = 75%1:10 = 60%1:12 = 50%1:14 = 42.8%1:16 = 37.5%1:20 = 30%1:24 = 25%

If you need another size or have questions write me and i will answer ass soon as possible.

For my Setrab Oilcoolers I made some Hose connectors.

Check out the oilcoolers i made. i print them seperate and use superglue, another option would be to connect them in the slicer software.

I made 6 different styles:

45 deg machined90deg machined45deg bend tube90deg bend tube135deg bend tube180deg tube

If you need an different angle for the connector (or a special design) feel free to contact me and i could add them to this design !!

Scale 1:6 for tubes with the following sizes:0.5mm0.65mm0.8mm1.0mm2.0mm2.6mm

Scale 1:121mm2mm

Scale 1:60.5mm

And if you have questions write me a message and i will answer as soon as possible.

Only for Private Use. 3D files or 3D printed Models could not be given away for free or be sold!