COLLECTION for my Tamiya Honda CB750F designs

A collection of the following parts:

For my Custom Honda CB750F i wanted to remove the airfilter box so i designed these airintakes.

Inletdiameter 11mmheight 8mmInnerdiameter: 6mmwallthickness: 0.5mm

the model is in 1:6 scale but should be scaleable.

I'm building a diorama with a custom, caferacer style, build of the tamiya CB750F in 1:6 (model 16020) and i wanted to use the real link chain (12674) from tamiya that was designed for the Africa twin so there are no chain gears avaible.in the packet are 6 wheels:the large one in the same design like the one from the kit with 3 different teeth numbers (41 / 42 / 43) for me the 43 fits the best.the small one with a oin to glue fixed in place and with a center bore for a 2mm screw to make the chain movable (you will need a 3mm glued support on the engine)as well both with three different teeth numbers, 17/18/19 here the 18 worked best.but it depends a bit the paint thickness.

For my custom CB750F I designed these handle bars, the fit the original parts from the kit in 1:6 scale.

The angle to the back is about the same. but are outboards lowered a bit too, like shown in the pictures.It fits the original screws of the kit.

If you have any questions write me and i will answer as soon as possible.

Only for Private Use. 3D files or 3D printed Models could not be given away for free or be sold!